Aimpoint Acro Optic Milling

Original price was: $135.00.Current price is: $125.00.

The Aimpoint Acro optic milling creates a precision, direct mount feature on your Glock slide.

Questions?  Be sure to check out or FAQ page

  • Options Price: $0.00
  • Product Price: $125.00
  • Total: $0.00
Continue Shopping Category: Product ID: 3089


Our Aimpoint Acro optic milling creates a precision, direct mount feature on your Glock slide.  The Acro has a unique, modified picatinny rail mount which will be milled directly into your slide, so, no adapter plate will be required.  Once your slide is milled, the optic is securely held in place by the front and rear pocket edges, in addition to the undercuts which the optic clamps to.

Please note that the Aimpoint Acro is too long to place in front of the rear sight dovetail.  As such, we must place the Acro milling must on top of the rear sight’s dovetail.   If you are looking to co-witness with iron sights, you will need to select “Add Dovetail in front of optic” to install a rear iron sight.

With our Aimpoint Acro optic milling, the optic will sit as low as possible on your slide; however, if you are looking for a co-witness with your iron sights, suppressor height sights will still be required.  We recommend Ameriglo or Trijicon suppressor sights for those that are wanting a co-witness.

This and all of Alpha Dogs slide milling patterns are 100% CNC machined which increases milling accuracy and finish quality.  When a slide is milled, the finish in the milled are is removed which exposes the raw steel.  The raw steel will oxidize if left untreated!  To avoid oxidation, we recommend having us Cerakote the slide to preserve its integrity.

The Aimpoint Acro milling is not available for slim line Glocks (G42, G43, G43X & G48), or MOS models.

NOTE: This is only available for Glock slides and is for milling service on a customer supplied slide ONLY.  Unless selected as an option above, the milling cost does NOT include slide refinishing.  Milled areas will remove the slides coating and expose raw steel which will rust if left untreated.  

Additional information


Available for all Glock models, Black Glock frames ONLY.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Alpha Dog Design, LLC, nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit