Trijicon RMR Optic Milling

Alpha Dogs Trijicon RMR optic milling creates a direct mount feature on your Glock slide.  Our Trijicon RMR milling creates a high tolerance precision pocket which securely holds the optic in place by the front and rear pocket edges, in addition to the mounting screws,  As a result, there is no awkward gap in front of the optic when it mounted.  With our direct mount feature, no adapter plate will be required to mount your optic.

With our Trijicon RMR milling, the optic will sit as low as possible on your slide; however, if you are looking for a co-witness with your iron sights, suppressor height sights will still be required.  We recommend Ameriglo or Trijicon suppressor sights for those that are wanting a co-witness.

This and all of Alpha Dogs slide milling patterns are 100% CNC machined which increases milling accuracy and finish quality.  When a slide is milled, the finish in the milled are is removed which exposes the raw steel.  The raw steel will oxidize if left untreated!  To avoid oxidation, we recommend having us Cerakote the slide to preserve its integrity.

The Trijicon RMR milling is not available for slim line Glocks (G42, G43, G43X & G48), or MOS models.

NOTE: This is only available for Glock slides and is for milling service on a customer supplied slide ONLY.  Unless selected as an option above, the milling cost does NOT include slide refinishing.  Milled areas will remove the slides coating and expose raw steel which will rust if left untreated.